... ACLK clock source. As we mentioned, if any device module needs to use any clock source, it needs to send a clockusingrequest to the CS module. For conditional requests, two conditions must be met: 1. The selected peripheral is enabled ...
... CLOCK 0 0 0 0 Active All clocks on 0 0 0 1 LPM0 CPU, MCLK off and SMCLK, ACLK active 0 1 0 1 LPM1 CPU, MCLK, DCO off and SMCLK, ACLK active 1 0 0 1 LPM2 CPU, MCLK, SMCLK, DCO off and ACLK active 1 1 0 1 LPM3 CPU, MCLK, SMCLK, DCO, DCO ...
... clocks receive clock signals from the DCOCLK clock generator and the ACLK clock is driven by the LFXT1CLK clock signal generator. The configuration and selection of the clock signal generators are performed by the following five ...
... clock system generates the clocks used by the MCU from a variety of on-chip and off-chip oscillators. Many different ... (ACLK). v MCLK's primary function is to drive the CPU and memory. v SMCLK and ACLK's primary functions are to drive ...
... (ACLK), taken out from the crystal oscillator. A buffered, software selectable output XBUF is also available, that provides as output either MCLK, ACLK ... Clock 271 6.4.1 The FLL and FLL+ Clock Modules.
... ACLK remain active , I = 85A . This is used when the CPU is not required but some modules require a fast clock from SMCLK and the DCO . LPMO must be used when the DCO source signal is required as well as the DCO's DC generator . LPM1 ...
... clock zero crossings are at the point of maximum slope of the clock waveform ... Aclk = –4 dBm = 0.2 V, (7.15) This is also too low to be responsible for the ... find the spectrum would almost certainly yield higher SNR than is found on a ...
... Clock Module of the MSP430 has three available clock signals : ⚫ ACLK : This is the Auxiliary clock and is used in peripheral modules . • MCLK : This is the Master clock and is used by the CPU . • SMCLK : This is the Sub - main clock ...
... clock module to drive the CPU and peripherals. The conflicting requirements for clocks in high-performance, low ... ACLK is also distributed to peripherals. Most peripherals can choose either SMCLK, which is often the same as MCLK and in the ...