Nov 7, 2019 · Part Number: MSP430FR6989 Is the default frequency of the SMCLK 1.048MHz as seen here ...
People also ask
What is the frequency of Smclk in MSP430?
After a device reset, the MSP430 MCU sources the subsystem master clock (SMCLK) from the DCO configured to run at 16 MHz. The device then executes a frequency command stored in FRAM that divides SMCLK to the last known frequency before device reset.
What is the difference between SMclk and ACLK?
The master clock (MCLK) is derived from any of the four oscillators, and it drives the cpu. The sub-main clock (SMCLK) is derived from any of the four oscillators, and it drives peripherals. The auxiliary clock (ACLK) is derived from either VLOCLK or LFXT1CLK, and it drives peripherals.
What is the frequency of AC LK?
ACLK is usually a 32kHz crystal clock. It is used for peripheral modules that require a low-frequency clock (e.g. real-time-clock, ...)
This design can achieve output frequencies of 1 MHz,. 2 MHz, 4 MHz, 8 MHz, or 16 MHz using the internal digitally controlled oscillator (DCO) stabilized with an ...
Missing: search | Show results with:search
On power up or after a reset, the device is configured such that MCLK is sourced from DCOCLK which has a frequency of approximately 1.1MHz. SMCLK is also ...
Feb 22, 2015 · (2) Use two timers, one from each clock source, and count how many ticks of the high-speed clock happen between two 32 kHz ticks. If the value ...
Clocks on the MSP430 Launchpad After power-up, MCLK and SMCLK are sourced from DCOCLK at about 1.1MHz. ACLK is sourced from LFXT1CLK in LF mode.
Missing: search | Show results with:search
Apr 2, 2014 · In the Unified Clock System module,(can be found on the device's user guide), there are registers to achieve frequency change.
Nov 22, 2016 · Search jobs. Measuring clock frequency on pin on MSP430 ... You can output clock signals (ACLK, MCLK, SMCLK) on a pin. ... Real time clock , MSP430.
Example 2: SMCLK, MCLK = 8 MHz. ACLK = 32768 Hz. Example 3: SMCLK, MCLK = 16 MHz ACLK = 32768 Hz. Page 17. Example 1: MCLK, SMCLK = 1MHz ACLK = 32768Hz. Page 18 ...
Oct 21, 2022 · Question: Assuming that you choose to use the MSP430 timer with an SMCLK low frequency of 32kHz. Configure TimerA to generate an interrupt ...
Duration: 13:48
Posted: Apr 23, 2020
Posted: Apr 23, 2020