... and quick guide to find all important MSP430 resources. ... You can search MSP low-power microcontroller content or ask technical support ... We are a global ...
May 8, 2019 · I am using the MSP430FR5738 microcontroller (28 pin QFN package), these GPIOS are currently connected to LEDs (each 50-ohm resistor and a LED).
Jan 13, 2019 · I have 3 volts and 5 volts to ground on my power pins and I can get the “blink“ program to run. I made a bank of led lights with 330 ohm ...
Missing: url 303182/ smclk- aclk
I just test with msp430fr2355 EVM and it works ok when line 874 is executed. However, when i run app on msp430fr2155, it hang when it execute line 874. and it ...
Missing: url 303182/ smclk- aclk
Hi Hayden,. I know you're working on the MSP430F5529 but have you considered using the MSP430FR5994? The MSP430FR5994 has a Low Energy Accelerator (LEA) ...
Missing: url 303182/ smclk- aclk
Part Number: MSP430F6459 Other Parts Discussed in Thread: UNIFLASH , Hi, I am trying to program customized msp430f6459 through msp-fet-430uif using uniflash ...
Missing: 303182/ smclk- aclk
I am attempting to operate the MSP430's RISC CPU at 32,768 kHz sourced by the LFXT1CLK. It doesn't appear to work. I export the ACLK and MCLK, and while ACLK is ...
Missing: url 303182/
I am using 20 Mhz External crystal on XT2. everything is working fine when i am selecting XT2 as MCLK clock source and dividing MCLK by 2(i.e., MCLK=XT2/2=10Mhz) ...
Missing: url 303182/
People also ask
What is MSP430 microcontroller used for?
The MSP430 microcontroller family offers ultra-low power mixed signal, 16-bit architecture that is perfect for wireless low-power industrial and portable medical applications.
Why is the MSP430 low power?
Low power operation is a key feature of the MSP430. Its design gives very low leakage, and it operates from a single supply rail. This gives an extremely low current drain when the processor is in standby mode. Several low power modes are supported, which balance the needs of different applications.
What does MSP stand for in MSP430?
MSP430 is a 16-bit mixed signal Microcontroller family developed by Texas Instruments. Mixed Signal IC means that a single IC has have both Analog and Digital circuits. MSP430 CPU uses Von Neumann Architecture. It consists of different varieties. It comes as an Microcontroller as well as in Launchpad.
What power does MSP430 require?
The MSP430 devices require only a single 3.3-V input; no sequencing is required. The operating input voltage for this reference design is 3.6V to 15V. This design is optimized for efficiency, high and wide input voltage range, small size, and low component count.
In order to show you the most relevant results, we have omitted some entries very similar to the 8 already displayed.
If you like, you can repeat the search with the omitted results included. |